High Performance 8-Port RS-232/422/485 PCIe/104 Serial Port Module With Opto-isolation, Software Configuration, and Auxiliary Digital and Analog I/O EMM-8EL-XT Family
Emerald-MM-8EL-XT (EMM-8EL-XT), a family of high performance PCIe/104 OneBankTM serial I/O modules offering 4 or 8 serial ports with software-controlled configuration and optional opto-isolation.
MOUNTAIN VIEW, CA — Diamond Systems, a leading global supplier of compact, rugged, embedded computing solutions for real-world applications in a broad range of markets, today introduced Emerald-MM-8EL-XT (EMM-8EL-XT), a family of high performance PCIe/104 OneBankTM serial I/O modules offering 4 or 8 serial ports with software-controlled configuration and optional opto-isolation.
The serial ports are based on a high speed PCIe octal UART with 256-byte TX/RX FIFOs and auto RS-485 transmit control. Each serial port can be independently configured for RS-232, RS-422, or RS-485 protocols, along with programmable 120-ohm line termination. Each port is independently isolated with an isolated power + signal chip, plus additional isolators for control signals. The board features intelligent power management that limits inrush current on power-up and also enables power-down of unused serial ports for power savings.
Opto-isolated models feature independent 2500V isolation circuits for enhanced reliability in vehicle or long cable applications. All ports also feature +/-15KV ESD protection. Each serial port is available on an independent latching connector for increased isolation and ruggedness. With its wide operating temperature range and high resistance to shock and vibration, the EMM-8EL-XT fits a wide variety of rugged and on-vehicle embedded serial I/O application needs.
EMM-8EL-XT also offers 8 digital/analog I/O lines which are programmable from the on-board microcontroller. Each I/O line can be configured for digital input or output. Seven of the I/O lines can also be configured for 12-bit A/D input with selectable 0-2.048V or 0-3.3V input ranges.
EMM-8EL-XT contains no configuration jumpers; all configuration and control is done with an onboard microcontroller. All configuration settings are stored in the microcontroller's flash memory and are automatically loaded on power-up. The microcontroller is managed with a comprehensive software suite that makes configuring the EMM-8EL-XT fast and simple. A graphical control panel, a console application, and drivers for Windows and Linux are provided to enable convenient configuration of the board and control of the I/O features in a laboratory or system assembly environment, or embedded in the customer’s application software.
EMM-8EL-XT is compatible with Windows 7/Vista/2000/XP and Linux and is qualified for operation over the full industrial temperature range of -40oC to +85oC.
EMM-8EL-XT’s key features and functions are tabulated below.
Key Features and Functions 8 serial ports with up to 10Mbps data rates 16550 compatible octal UART with 256-byte TX/RX FIFOs Models available with or without opto-isolation 8 programmable digital I/O or analog input lines On-board microcontroller manages and stores configuration settings All configuration done via software; no jumpers Comprehensive software suite enables easy configuration and control Latching connectors for increased ruggedness PCIe x1 host interface using PCIe/104 “OneBankTM” connector Rugged design: -40oC to +85oC operating temperature Support for Windows Embedded Standard 7, XP, Vista, 2000 and Linux 2.6.xx PCIe/104 form-factor: 3.55" x 3.775" (90mm x 96mm)
Pricing and Availability
The Emerald-MM-8EL-XT PCIe/104 serial module family is available immediately. Single unit pricing starts at US$675 for the EMM-8EL-XT model.
8-port PCIe/104 Serial Module with opto-isolation
4-port PCIe/104 Serial Module with opto-isolation
8-port PCIe/104 Serial Module, no opto-isolation
8-port PCIe/104 Serial Module, no opto-isolation
Founded in 1989 and based in Mountain View, California, Diamond Systems Corporation is a leading global provider of compact, rugged, board- and system-level real world embedded computing solutions to companies in a broad range of markets, including transportation, energy, aerospace, defense, manufacturing, medical, and research. The company is renowned as an innovator of embedded I/O standards and technologies; it originated the FeaturePak I/O modules standard, was an early adopter of PC/104 module technology, and holds a patent for a unique analog I/O autocalibration technique.
Diamond’s extensive product line includes compact, highly integrated single-board computers (SBCs); an extensive line of expansion modules for analog and digital I/O, wired and wireless communications, GPS, solid-state disk, and power supply functions; and complete system-level solutions. In support of performance-critical embedded application requirements, these products are engineered to operate reliably over wide operating temperature ranges, such as –40°C to +85°C, and at high levels of shock and vibration. Additionally, the company offers a comprehensive hardware, software, and system integration and customization services.
For further information, please visit www.diamondsystems.com or call +1-800-367-2104.